WEEK 3 FYP 2

Title of activity:

Block diagram and flow chart

Objectives:

To explain clearly about process of this project

Content/Procedure: 

1. list all the input and output.
2. State the process of the project.

ANALYSIS

 The switch is the input of this project. The users give instruction by using this switch. Then the input from the switch is fed to PIC micro controller. The pic microcontroller will control the program and give instruction to the DC motor control which is the H bridge circuit. This make the dc motor get instruction and perform the results in wheelchair which we can see the results in mechanical performance. PIC that will use in this project is PIC 16F877A that working like a brain to receive the input from the switch and give instruction to motor to operate. It also produces output to the blinking of Led and LCD’s display.

The flowchart is discussed about the whole of process of project. This project will program that this prototype will operate when get command from the user by switch. Then the command from the user is the input for pic program and will produce output which is LCD display, red and green led that act as indicator, the movement of wheel and reclining’s part.

 CONCLUSION

The blcok diagram and flow chart must correct so the flow or process this project can be smooth. InsyaAllah.